Serum PAPP-A measurements in first-trimester screening for Down syndrome

Serum PAPP-A measurements taken from 254 women in the first trimester are reported. Eleven chromosomal abnormalities were detected. The mean serum PAPP-A levels in cases of Down syndrome were 0.44 MOM at 9 weeks gestation, 0.15 MOM at 10 weeks, and 0.29 MOM at 11 weeks. The PAPP-A level at 10 weeks was below those of pregnancies which aborted spontaneously. At 11 weeks, the pregnancies with Down syndrome recorded the lowest PAPP-A levels at that gestation. On this small sample, offering chorionic villus sampling to women with singleton pregnancies and a PAPP-A level below 0.3 MOM (approximately 6.5 per cent of this at-risk group) would have detected all the Down syndrome fetuses at 10 weeks and 50 per cent at 11 weeks without selecting those cases destined to abort. This suggests that serum PAPP-A should continue to be investigated as a potential first-trimester screening test for Down syndrome.     

High concentrations of polybrominated diphenylethers (PBDEs) in breast adipose tissue of California women

We measured major PBDEs and PCBs in breast adipose tissues of California women participating in a breast cancer study in the late 1990s. Samples were analyzed using gas chromatography with electron impact ionization and tandem mass spectrometry detection. The congener profile observed was: BDE47>BDE99>BDE153>BDE100>BDE154 and PCB153>PCB180>PCB138>PCB118. Whereas high correlations were observed within each chemical class, very weak correlations appeared between classes, pointing to different exposure pathways. Weak negative associations were observed for PBDE congeners and age. Our PBDE data are among the highest reported, exceeding data from the National Health and Nutrition Examination Survey and consistent with the high use of PBDEs in California. These data may be helpful in establishing a baseline for PBDE body burdens to gauge changes over time as a result of restrictions in the use of PBDE formulations.     

Financing for innovative technologies and best practices to reduce persistent organic pollutants

Persistent Organic Pollutants (POPs) threaten human health and the global environment. Recognizing their dangers many countries began to limit or ban POPs production, use, and release in the 1990s. Eventually the Stockholm Convention on POPs, was adopted in 2001 and entered into force in 2004. The Global Environment Facility (GEF) provides financial support to developing country Parties for the implementation of the Stockholm Convention. The GEF’s POPs investment portfolio focuses on: 1) strengthening the capacity of developing country Parties to implement the Stockholm Convention; 2) establishing and supporting partnerships to develop and implement National Implementation Plans (NIPs), and 3) demonstrating and deploying best technologies and practices to reduce POPs emission, including development of safe alternatives. Since 2001 the GEF has committed US$568.8 million to POPs projects and leveraged some US$1474.5 million in co-financing from partners in the public and private sectors, bringing the total value of the GEF POPs portfolio to over US$2 billion. With GEF support, 108 developing country Parties have developed their NIPs. The GEF also financed 109 projects for the implementation of the Convention. Upon completion, these GEF POPs investments will contribute to the disposal of more than 70,000 tons of Polychlorinated Biphenyls (PCBs) oil, contaminated equipments, and waste, more than 40,000 tons of obsolete POPs pesticides and associated waste, and reducing dioxin/furan and mercury emission by introducing environmentally sound technologies and best practices. This paper summarizes: 1) direct and indirect GEF investments to support the goals of the Stockholm Convention; 2) investment case studies on PCB, DichloroDiphenylTrichloroethane (DDT), chlordane and mirex, medical waste, obsolete POPs and engaging civil society; and 3) lessons learned in terms of GEF financing strategies, best technologies and environmental practices to address POPs.     

Assessing the Potential for Salmon Recovery via Floodplain Restoration: A Multitrophic Level Comparison of Dredge-Mined to Reference Segments

Pre-restoration studies typically focus on physical habitat, rather than the food-base that supports aquatic species. However, both food and habitat are necessary to support the species that habitat restoration is frequently aimed at recovering. Here we evaluate if and how the productivity of the food-base that supports fish production is impaired in a dredge-mined floodplain within the Yankee Fork Salmon River (YFSR), Idaho (USA); a site where past restoration has occurred and where more has been proposed to help recover anadromous salmonids. Utilizing an ecosystem approach, we found that the dredged segment had comparable terrestrial leaf and invertebrate inputs, aquatic primary producer biomass, and production of aquatic invertebrates relative to five reference floodplains. Thus, the food-base in the dredged segment did not necessarily appear impaired. On the other hand, we observed that off-channel aquatic habitats were frequently important to productivity in reference floodplains, and the connection of these habitats in the dredged segment via previous restoration increased invertebrate productivity by 58%. However, using a simple bioenergetic model, we estimated that the invertebrate food-base was at least 4× larger than present demand for food by fish in dredged and reference segments. In the context of salmon recovery efforts, this observation questions whether additional food-base productivity provided by further habitat restoration would be warranted in the YFSR. Together, our findings highlight the importance of studies that assess the aquatic food-base, and emphasize the need for more robust ecosystem models that evaluate factors potentially limiting fish populations that are the target of restoration.     

The radiative efficiency of HCF2OCF2OCF2CF2OCF2H (H-Galden 1040x) revisited

The infrared spectrum of HCF₂OCF₂OCF₂CF₂OCF₂H (CAS# 188690-77-9) has been re-measured. The integrated absorption intensity over the range 1000–1500 cm^?1 measured in the present work is (6.65 ± 0.33) × 10^?17 cm² molecule^?1 cm^?1 in 700 Torr of air at 296 K. The radiative efficiency of HCF₂OCF₂OCF₂CF₂OCF₂H is calculated to be 1.02 W m^?2 ppb^?1. The value reported in the 2007 Intergovernmental Panel on Climate Change (IPCC) report is approximately 35% larger reflecting what we believe to be an erroneously high value for the absorption strength of HCF₂OCF₂OCF₂CF₂OCF₂H adopted by the IPCC.     

Utilitarian killing,replacement, and rights

The ethical theory underlying much of our treatment of animals in agriculture and research is the moral agency view. It is assumed that only moral agents, or persons, are worthy of maximal moral significance, and that farm and laboratory animals are not moral agents. However, this view also excludes human non-persons from the moral community. Utilitarianism, which bids us maximize the amount of good (utility) in the world, is an alternative ethical theory. Although it has many merits, including impartiality and the extension of moral concern to all sentient beings, it also appears to have many morally unacceptable implications. In particular, it appears to sanction the killing of innocents when utility would be maximized, including cases in which we would deliberately kill and replace a being, as we typically do to animals on farms and in laboratories. I consider a number of ingenious recent attempts by utilitarians to defeat the killing and replaceability arguments, including the attempt to make a place for genuine moral rights within a utilitarian framework. I conclude that utilitarians cannot escape the killing and replaceability objections. Those who reject the restrictive moral agency view and find they cannot accept utilitarianism's unsavory implications must look to a different ethical theory to guide their treatment of humans and non-humans.     

NITROGEN CONTENT AND ACIDITY OF RAIN ON THE GEORGIA COAST1

ABSTRACT: Since nitrogen is a nutrient frequently in short supply in coastal ecosystems, an estimate of the nitrogen input via rain was made for the Georgia coast. Water samples collected in 34 separate storms during a 12 month period were analysed for concentrations of ammonia, nitrate plus nitrite, and dissolved organic nitrogen (DON). The range and average concentration in micromoles of nitrogen per liter was 0.0 to 137 (6.3) for ammonia, 1.0 to 21 (7.9) for nitrate plus nitrite, and 0.0 to 13.6 (4.0) for DON. DON, not usually measured in rain, comprised up to 62% of the total nitrogen content. The annual amount of nitrogen contributed by rain to the coast was about 0.3 g N/m². This value is a small fraction of the calculated nitrogen requirements of coastal plants. More than half the rain samples had pH values less than the CO₂ equilibrium pH of 5.6. Values as low as 4.2 were in the range of pH values reported for acid rain in Europe and the northeastern U.S. Total titratable acidity was measured for 12 summer rainwater samples. The results fox 7 individual storms showed a highly linear relation between hydrogen ion concentration and total acidity. However, the elope of the regression line indicated that increases in acidity were not a result of addition of strong acid alone.     

‘Special agents’ trigger social waves in giant honeybees (Apis dorsata)

Giant honeybees (Apis dorsata) nest in the open and have therefore evolved a variety of defence strategies. Against predatory wasps, they produce highly coordinated Mexican wavelike cascades termed ‘shimmering’, whereby hundreds of bees flip their abdomens upwards. Although it is well known that shimmering commences at distinct spots on the nest surface, it is still unclear how shimmering is generated. In this study, colonies were exposed to living tethered wasps that were moved in front of the experimental nest. Temporal and spatial patterns of shimmering were investigated in and after the presence of the wasp. The numbers and locations of bees that participated in the shimmering were assessed, and those bees that triggered the waves were identified. The findings reveal that the position of identified trigger cohorts did not reflect the experimental path of the tethered wasp. Instead, the trigger centres were primarily arranged in the close periphery of the mouth zone of the nest, around those parts where the main locomotory activity occurs. This favours the ‘special-agents’ hypothesis that suggest that groups of specialized bees initiate the shimmering.     

Influence of natural dissolved organic carbon on the bioavailability of mercury to a freshwater alga

Bioavailability of mercury (Hg) to Selenastrum capricornutum was assessed in bioassays containing field-collected freshwater of varying dissolved organic carbon (DOC) concentrations. Bioconcentration factor (BCF) was measured using stable isotopes of methylmercury (MeHg) and inorganic Hg(II). BCFs for MeHg in low-DOC lake water were significantly larger than those in mixtures of lake water and high-DOC river water. The BCF for MeHg in rainwater (lowest DOC) was the largest of any treatment. Rainwater and lake water also had larger BCFs for Hg(II) than river water. Moreover, in freshwater collected from several US and Canadian field sites, BCFs for Hg(II) and MeHg were low when DOC concentrations were >5mg L(-1). These results suggest high concentrations of DOC inhibit bioavailability, while low concentrations may provide optimal conditions for algal uptake of Hg. However, variability of BCFs at low DOC indicates that DOC composition or other ligands may determine site-specific bioavailability of Hg.     

Ecodesign methods focused on remanufacturing

Understanding the product's ‘end-of-life’ is important to reduce the environmental impact of the products' final disposal. When the initial stages of product development consider end-of-life aspects, which can be established by ecodesign (a proactive approach of environmental management that aims to reduce the total environmental impact of products), it becomes easier to close the loop of materials. The ‘end-of-life’ ecodesign methods generally include more than one ‘end-of-life’ strategy. Since product complexity varies substantially, some components, systems or sub-systems are easier to be recycled, reused or remanufactured than others. Remanufacture is an effective way to maintain products in a closed-loop, reducing both environmental impacts and costs of the manufacturing processes. This paper presents some ecodesign methods focused on the integration of different ‘end-of-life’ strategies, with special attention to remanufacturing, given its increasing importance in the international scenario to reduce the life cycle impacts of products.